Schneider Chargeer - 11 kW - 3P+N - 7 m cableEVH5A11N2C7

The Schneider Charge wall-mounted charging station is compatible with all electric vehicles that comply with the IEC 61851-1 standard. Its ingress protection rating is IP55, and its impact protection rating is IK10. The operating temperature ranges from -35°C to 55°C. The output is a 7 m connected cable with a Type 2 connector at the end, mounted at the bottom and upper center of the station. The rated output power is 11 kW. It is three-phase (3P+N). The rated charging current is 16 A at 400 V AC and a frequency of 50/60 Hz. It can be used with TN-S, TT, or IT earthing systems. The charging station is easy to install, with no special tools required. It is recommended for private home use, installed in a garage or on an exterior wall. Its dimensions are 244 mm wide × 352 mm high × 107 mm deep. The product weighs 5.1 kg without the cable. It is white (RAL 9003) and green. It features built-in protection against residual current, using an RDC-DD residual current detection device. There are no access restrictions for charging electric vehicles. An LED switches between red, green, and blue to indicate the charging status directly on the charging station. This enables real-time adjustment of the maximum power supplied to the electric vehicle according to the consumption of other appliances in the house. Charging can be easily started, monitored, and controlled. The station can connect to a monitoring device or a third-party cloud service using the OCPP 1.6 communication protocol. It can also connect to the home internet router via Wi-Fi or an RJ45 Ethernet cable.