Schneider Charge Pro 1P/3P 7.4/11/22 kW 16/32A - T2 socket- 4G modem EVB4S22N40G

This Schneider Charge Pro product is a wall-mounted charging station for all electric vehicles that comply with the IEC 61851-1 standard. It can also be mounted on a support pedestal and installed both indoors and outdoors. The IP protection rating is IP55. The IK protection rating is IK10. The operating temperature range is between -30°C and 50°C. The output type is a Type 2 socket located on the front of the station. The nominal output power depends on the product configuration: 7.4 kW with a single-phase supply, a nominal charging current of 32 A, a voltage of 230 V (220–240 V), and a frequency of 50/60 Hz; or 11 kW or 22 kW with a three-phase supply, a nominal charging current of 16 A or 32 A, a voltage of 400 V (380–415 V), and a frequency of 50/60 Hz. It can be used with TN-S, TN-C, TT, or IT 230 grounding systems. The charging station is easy to install and commission. It is recommended for both residential and fleet applications. Its dimensions are 292 mm wide × 418 mm high × 136 mm deep. The product weighs 3 kg. It is black (RAL 9005). It features built-in residual-current protection, including an RDC-DD residual-current detection device. It includes one built-in Wi-Fi module, one 4G modem, and two Ethernet interface modules. Using eSetup, it can be configured to allow charging to start freely or via an RFID card. A white push button enables activation of a direct Wi-Fi connection, which can then be used to connect to the eSetup mobile application for configuration. An LED switches between red, green, blue, white, and orange to indicate the charging status directly on the charging station. The charger can communicate with a Linky smart meter using the TIC protocol. This enables real-time adjustment of the maximum power allocated to the electric vehicle charger according to the consumption of other devices in the home. Using the OCPP 1.6J communication protocol, it can connect to a supervisory device or a third-party cloud service. It can also connect to the home internet router via Wi-Fi or an RJ45 Ethernet cable.