Schneider Car Charger - 7,4 kW - 1P+N - 7 m cable EVH5A07N2C7

The Schneider Charge wall-mounted charging station is compatible with all electric vehicles that comply with the IEC 61851-1 standard. It has an IP55 ingress protection rating and an IK10 impact protection rating. The operating temperature range is from -35°C to 50°C. The output is a 7 m connected cable with a Type 2 connector at the end, mounted at the bottom and upper center of the station. The rated output power is 7.4 kW. It is available in a single-phase (1P+N) version. The rated charging current is 32 A at 230 V AC and a frequency of 50/60 Hz. It can be used with TN-S, TT, or IT earthing systems. The charging station is easy to install, with no special tools required. It is recommended for private home use, installed in a garage or on an exterior wall. Its dimensions are 244 mm wide × 352 mm high × 107 mm deep. The product weighs 5.3 kg without the cable. It is available in white (RAL 9003) and green. It features built-in leakage-current protection using an RDC-DD residual direct current detection device. There is no access restriction for electric vehicle charging. An LED switches between red, green, and blue to indicate the charging status directly on the charging station. This enables real-time adjustment of the maximum power supplied to the electric vehicle according to the consumption of other appliances in the home. Charging can be easily started, monitored, and controlled. Using the OCPP 1.6 communication protocol, it can connect to a monitoring device or a third-party cloud service. It can also be connected to the home internet router via Wi-Fi or an RJ45 Ethernet cable.