Schneider Car Charger - 7,4 kW - 1P+N - 5 m cable EVH5A07N2C5

The Schneider Charge wall-mounted charging station is compatible with all electric vehicles that comply with the IEC 61851-1 standard. It has an IP55 ingress protection rating and an IK10 impact protection rating. The operating temperature ranges from -30°C to 50°C. The output consists of a 5 m connected cable with a Type 2 connector at the end, mounted on the bottom and upper center of the station. The rated output power is 7.4 kW. It is available in a single-phase (1P+N) configuration. The rated charging current is 32 A at 230 V AC and a frequency of 50 Hz/60 Hz. It can be used with TN-S, TT, or IT earthing systems. The charging station is easy to install, with no special tools required. It is recommended for private home use, installed in a garage or on an exterior wall. Its dimensions are 244 mm (width) × 352 mm (height) × 107 mm (depth). The product weighs 4.5 kg (excluding the cable). It is white (RAL 9003) and green. It features built-in residual-current protection (RDC-DD residual-current detection device). There is no access restriction for charging electric vehicles. An LED switches between red, green, and blue to indicate the charging status directly on the charging station. This enables real-time adjustment of the maximum power supplied to the electric vehicle according to the consumption of other appliances in the house. Charging can be easily started, monitored, and controlled. Using the OCPP 1.6 communication protocol, it can connect to a monitoring device or a third-party cloud service. It can also connect to the home internet router via Wi-Fi or an RJ45 Ethernet cable.